Midland ML802 Instruction Manual page 11

Duplex Operation
Press and hold the MENU key on channels 1-8 and channels 41-48 to enable the Duplex operation.
Duplex operation allows the radio to transmit on a different frequency to that which it receives
allowing operation through repeater stations. Repeaters automatically retransmit your signal over a
wider area providing greatly increased range. Duplex operates only on channels 1-8 & 41-48. When
duplex is selected on these channels, the radio receives on that channel but actually transmits 30
channels higher. In repeater mode, the radio only operates on repeater channels.
Channel Selecting
Receiving Channel
Transmitting Channel
Channel Selecting
Receiving Channel
Transmitting Channel
* Channel only for Emergency.
PRI Channel
The Priority Channel feature allows you to immediately recall any one of your channels with instant
access to your working channel or your local repeater with one button.
PRI Channel Setting
1: Select the channel you requested
2: Press and hold the PRI function key, then enter the priority channel setting, and then select the
priority channel through the channel selection key. When selecting the channel you requested, press
the PRI function key for a second time to complete the priority channel setting.
Call Back the PRI Channel
Press the PRI function key, the intercom will switch to the set priority channel immediately after the
PC logo is displayed. PRI short press the function key again to exit the priority channel mode.
When you press the PTT button, the LCD will display the PC logo instead of the priority
channel number.
Note: If the PRI function key is pressed while the intercom is in the scanning status, it will exit the
scan mode.
1 2 3 4 5* 6 7 8
1 2 3 4 5* 6 7 8
31 32 33 34 35* 36 37 38
41 42 43 44 45* 46 47 48
41 42 43 44 45* 46 47 48
71 72 73 74 75* 76 77 78
11