Dynamic Range Control Settings - Sangean Revery R8 User Manual

Dynamic Range Control settings

Dynamic Range Control (also known as DRC) can make quieter sounds easier to hear when
your soundbar is used in a noisy environment by reducing the dynamic range of the audio signal.
1. Press the On/Standby button to switch on your soundbar.
2. Press the Radio button as needed to select DAB Radio mode.
3. Press and hold the Menu button to enter the DAB menu.
4. Press the Menu Up or Down buttons until 'DRC' is highlighted on the display.
5. Press and release the Select button to enter the DRC adjustment mode. The current DRC
setting will be indicated with an asterisk.
6. Press the Menu Up or Down buttons to highlight the required DRC setting (the default is Off).
'DRC Off' - DRC is switched off, Broadcast DRC will be ignored.
'DRC high' - DRC is set as sent by broadcaster.
'DRC low' - DRC level is set to 1/2 that sent by broadcaster.
7. Press and release the Select button to confirm the setting.
Note: Not all DAB broadcasts use the DRC function. If the broadcast does not provide DRC
information, then the DRC setting in the soundbar will have no effect.
50
2
DAB
radio
DAB Radio
3
DAB
Station list
Scan
Manual tune
Prune invalid
4,6
DRC
Station order
4,6
DRC
DRC high
DRC low
DRC off
5,7
>
>
>
>
*