Makita UBlPlDZ Instruction Manual page 5

Blowing
For dust blowing, attach the nozzle to the
blower outlet, turning clockwise to lock it in
place.
After the bag fills with dust, empty the con-
tents of the dust bag into a dust bin by
releasing the fastener.
Nozzle Blow
CAUTION:
Empty the dust bag before it becomes too
full, or the suction force weakens.
-
Fastener
Installing set plate
For UBlPlD
Always install the set plate when using bat-
tery cartridges 1200, 1202
or
1202A. Install
the set plate on the tool with the screw pro-
vided.
Set plate
5