Hardware Installation
The Outdoor Wireless Base Stations require external antenna that
corresponds to your network environment. It is recommended to buy
and use TP-LINK's matching antennas.
Recommended
Antenna Type
Dish Antenna
Sector Antenna
Connect Cables
1
Firmly grasp the rear of the interface
cover and pull it downward.
2
Use an adequate Ethernet cable to
connect the LAN0 (POE IN) port. The
length of cable is up to 60m for
steady power supply. Shielded CAT5e
(or above) cable with an integrated
ground wire is recommended.
TP-LINK's Matching
Antenna
TL-ANT2424MD (2.4GHz)
TL-ANT5830MD (5GHz)
TL-ANT2415MS (2.4GHz)
TL-ANT5819MS (5GHz)
1
English