Software Upgrading Using Remote Control - Sharp LC-32LE265T Service Manual

3. Software upgrading.
Software upgrading using local key.
1) Plug off the LCD TV.
2) Insert the USB device to the USB terminal at the LCD TV.
(Make sure that the latest software is installed in the USB device).
3) Hold the LCD TV power key and plug on the LCD TV.
4) LCD TV is on and detecting the USB device.
5) A few second later ,LED light (orange ) will blink indicating the software upgrading .
6) LED light (Green) will blinking when a software is successfully installed.
7) Plug Off the LCD TV and plug ON again as usual.
8) LCD TV is running with the latest software.

Software upgrading using remote control.

1) Make sure LCD TV is ON .
2) Insert the USB device to the USB terminal at the LCD TV.
(Make sure that the latest sotware is installed in the USB device ).
3) Use below menu proceedure to start upgrading software version.
i. Menu >> Option >> System data
ii. Are you sure ? >> yes
4) A few second later,the software upgrading will start automatically.
5) TV will automatically restart when software is successfully installed.
6) LCD TV is running with the latest software .
3 – 2
LC-32LE265T / LC-40LE265T