Setting The Diseqc Method - Raymarine Satellite TV Systems User Manual

34

Setting the DiSEqC method

SETUP MODE?
YES NO
SET SAT PAIR?
PREV YES NEXT
USE DISEQC?
PREV YES NEXT
DO NOT USE DISEQC
PREV SELECT NEXT
1. Press YES to enter set up mode.
2. Press NEXT 4 times to go to the Use
DiSEqC menu.
3. Press YES to enter the DiSEqC menu.
4. Select the DiSEqC method*
NEXT - shows next DiSEqC method.
SELECT - sets the displayed method.
EXIT - returns to main set up menu.
SAVE?
5. Press YES to accept the selection.
YES NO
* DiSEqC method
DO NOT USE DISEQC - DiSEqC is not used.
USE TO CHANGE BAND - DiSEqC is used to change high and low bands
(Europe).
USE TO CHANGE SAT - DiSEqC is used to change satellite being tracked (US -
DirecTV).
Raymarine Satellite TV Systems
Press NO to cancel and return to main
set up menu.