What's In The Box - Raymarine Satellite TV Systems User Manual

8

What's in the box?....

Raymarine STV Antenna Unit
houses the antenna positioning mechanism, low noise block (LNB), power supply and control elements within a
molded radome.
Connectors on the underside of the base plate join the power, signal and control cabling from the below decks units.
Antenna Control Unit (ACU)
controls power to the antenna unit via the On/Off switch. The three soft keys enable satellite programming and
antenna diagnostics to be carried out.
Installation kit
contains the items required for securing the antenna unit and ACU to
your boat.
• 4 x Hexagonal bolts.
• 4 x Spring washers.
System cables
Your Raymarine STV package also includes the following cables:
• RO8134 - 15 m Power and Data cable - used for connecting the antenna and ACU.
• RO8133 - 10 m Power cable - used for connecting the ACU to the DC power supply. (45STV models only).
• RO8280 - 10 m Power cable - used for connecting the ACU to the DC power supply.(60 STV models only).
• RO8135 - 15 m RF cable - used for connecting the Antenna and Integrated Receiver Decoder (IRD).
• RO8138 - 1.8 m PC cable - used for connecting the ACU to a personal computer for system set up and diagnostics.
CD-ROM
Contains the software for programming your system and carrying out system diagnostics using a personal computer.
• 4 x Flat washers.
• 4 x Self tapping screws.
Raymarine Satellite TV Systems
D7945_1
D7946_1
D7947_1