Setting The Local Frequency - Raymarine Satellite TV Systems User Manual

32
* Verification methods
SIGNAL - use only signal level for
tracking.
DVB LOCK - use only DVB lock signal
for tracking.
DVB DECODE - verify satellite using
DVB decoding method for tracking.
DSS LOCK - use only DSS lock signal
for tracking.
Note: (1) Raymarine does not recommend changing the satellite
information unless advised to do so by the satellite provider.
(2) Vertical and horizontal polarization applies to regions with linear
polarization only.
** Power supplying methods
AUTO - change voltage to LNB by
IRD voltage.
ONLY 13 V - always supply 13 V to
LNB.
ONLY 18 V - always supply 18 V to
LNB.

Setting the local frequency

LNB systems in regions with circular polarization
SETUP MODE?
1. Press YES to enter set up mode.
YES NO
SET SAT PAIR?
2. Press NEXT 3 times to enter the
PREV YES NEXT
SET LOCAL FRQ?
PREV YES NEXT
3. Press YES to set local frequency.
4. Select SINGLE LNB type.
LNB TYPE : SINGLE
PREV SELECT NEXT
Raymarine Satellite TV Systems
Local frequency menu.
PREV - shows previous LNB type.
SELECT - sets the displayed LNB type.
NEXT - shows the next LNB type.