Table of Contents
Advertisement
5.
Plug the
power cord
into an available
status light on the power supply indicates that it is working correctly.
power supply connector
6.
Plug the
7.
Make sure that the
LEDs ring
the problem continues, contact 3D Systems customer support.
3D Systems, Inc.
outlet
(for 110V the outlet must be rated for at least 2 Amps, for 220V: 1 Amp). The Green
back of the Touch
into the
at the base is lit
Blue.
Blue indicates the Touch has power. If it is not, check all of the connections. If
device.
7
Advertisement
Table of Contents
