Emptying the Water Container
Condensed water is collected in the water
Empty the water container after every use. Not
doing so will affect the drying performance.
If the water container is full, the
the buzzer sounds while the appliance is operating.
If this should occur, the water container needs to
be emptied within the next hour.
Pull out the water container.
Empty the water container in the sink.
Push it back into the appliance.
Press the Start/Pause button.
Cleaning the Cool Air Inlet Grill
Vacuum the Cool Air Inlet grill 3 - 4 times a year
to make sure there is no build up of lint or dirt that
may cause improper air flow.
icon glows and
• Warm air is exhausted through the ventilation
• Adequate ventilation should be provided to
Wiping the Moisture Sensor
This device senses the moisture level of the
laundry during operation, which means it must be
cleaned regularly to remove any build up of lime
scale on the surface of the sensor.
Wipe the sensors inside the drum.
• Do not wipe the moisture sensor with abrasive
avoid the back flow of gases into the room from
units burning other fuels, such as open fires.
materials. Always clean the sensor with a rough