Table of Contents
Advertisement
Display
5 Override Indication
Indicates the current program is currently being
overridden for up to 4 hours. See pages 2 and 5 .
6 Occupied or Unoccupied Indication
Indicates the program number: Occupied 1, 2, 3, or
Unoccupied. See pages 3 and 4.
7 Setup Indication
Indicates the thermostat is in the programming mode.
See page 4.
8 Fan Operation Indication
Fan
— indicates constant continuous fan
operation.
When Fan On Icon is not lit — indicates the fan will
only operate when necessary to heat or to cool. See
page 4.
9 Locked Indication
Locked appears after the right combination of buttons
are pressed, rendering the buttons inoperative.
See page 5.
10 Start/Stop Indication
Start or Stop appears when programming timer
functions. See page 3.
Quick Start Set the Clock and Go
:
Pm
Setup
Setup
Su
During Setup and Pro-
gramming: Pressing the
Mode button selects dif-
ferent flashing items.
(Represented in black)
Pressing the Up and Down
buttons will modify the
flashing selection.
Page 2
The thermostat is preprogrammed from the factory to operate
without the need for further programming. To optimize the in-
stallation of this thermostat follow the instructions in the Ad-
vanced Setup section.
The HEAT setting indicates
NOTE: The thermostat is not programmed to operate Duct-Free
the temperature the room has
Split heat pump systems .
to reach before the unit will
turn on to heat the room.
Basic Operation
Select Mode
The COOL setting indicates
the temperature the room has
to reach before the unit will
turn on to cool the room.
AUTO will automatically
select heat or cool based on
room temperature demand.
Program On will activate the
stored timer operation.
(Occupied and Unoccupied
periods.)
OFF indicates the system is
turned off.
Select Desired Temperature
:
Pm
Mo
COOL
AUTO
HEAT
Pressing the up/down buttons in Auto mode will adjust both the heat
and cool set temperatures simultaneously.
Pressing the up/down buttons in Heat or Cool modes will adjust only
the heat or cool set temperature.
Override
:
Pm
Stop
Su
unoccupied
COOL
HEAT
ProgramOn
:
Pm
:
Su
occupied 1
COOL
Override
HEAT
ProgramOn
:
Pm
Mo
HEAT
:
Pm
Mo
COOL
:
Pm
Mo
COOL
AUTO
HEAT
:
Pm
Mo
unoccupied
COOL
HEAT
ProgramOn
:
Pm
Mo
In any mode, adjust the
desired Set Point Temperature
with
buttons.
During programmed, unoccupied peri-
ods a press of the Override button will
force the thermostat into Occupied 1
comfort settings, temporarily.
With each successive push of the
Override button, the override timer will
add 30 minutes, until the maximum of
4 hours is reached. Then the next
press will zero out the override timer,
returning to unoccupied if there are no
further button presses.
When in Override, the Override icon
and the Occupied 1 icon appear on the
display.
The time of day clock alternates with
the time remaining in override.
During Override, the set points are ad-
justable, provided the keypad is not
locked.
Advertisement
Table of Contents
