Using Audiotherm With; Visiotherm S (Secuquick Softline) - AMC Audiotherm User Manual

Set stove at lower level, stop beep.
➔
During the cooking, pay attention to further
➔
beeps of the Audiotherm and regulate level
setting if necessary.
When the beep is heard and the symbol
§
"reduce" flashes, the temperature is too high
(indicator in stop window).
➔ Set stove at low level (or switch off completely),
stop beep.
In high-output stoves (for e.g. gas or induction
stoves), the signal can sound just before the stop
window is reached so that enough time remains
to go to the stove.
When the beep is heard and the symbol
§
"increase" flashes, the temperature is too low
(indicator under vegetable window).
Set stove at higher level, stop beep.
➔
In gas and induction stoves, after reducing the
energy, the temperature display can fall under
80 °C for a short time and then rise again. In this
case, no beep is heard and you don't have to set
the stove at higher level.
14
22
22
23
23
When the cooking time is over
(if a cooking time has been set):
Single, repetitive beep is heard.
§
The display "0:00" flashes.
§
➔ Switch off stove.
Stop beep, remove Audiotherm and switch off.
➔
7. Audiotherm with
Visiotherm S
(Secuquick)
Please also ensure to follow the user
§
manual of "AMC Secuquick softline".
Only when the Audiotherm works along
§
with the Navigenio in the automatic
program (according to chapter 8), the
necessary switching functions are
automatically executed.
24
24