Initialising Audiotherm; Stopping The Beep; Removing And Switching Off Audiotherm - AMC Audiotherm User Manual

Initialising Audiotherm

After setting and fitting :
Turn Audiotherm...
➔
6
The symbol "initialising" changes for a short
§
while to the steady state and then goes off.
6
...until the desired symbol flashes in the display
➔
(for e.g. "frying meat").
8
The indicator is then directed at the
§
corresponding window, with resting point.
8
The Audiotherm must possibly be turned
§
completely around until it is initialised. Do not
turn haltingly but with a uniform speed.
The Audiotherm can also be turned in the
opposite direction if the desired position has
been crossed over.
15 seconds after the initialising, the Audiotherm
§
can longer be moved. Movements can disrupt
the set function. If necessary, switch on or
initialise the Audiotherm anew.
7

Stopping the beep

7
Press right or left button firmly.
➔
Hold tightly and support the Audiotherm at
§
the front such that it does not move, thereby
disrupting the set function.
9
The beep stops by itself after 1 minute.
9

Removing and switching off Audiotherm

Lift Audiotherm at the back and remove.
➔
➔ Switching off: press both buttons
simultaneously for 1 second.
The Audiotherm switches off by itself 2 minutes
after removing.
10
10
11
12
11 12
11