Advertisement
3
Pull the wall bracket fixing part forward. Two people are required to install the product on the assigned area of the
wall bracket.
4
For managing the power cord and other cables for peripheral equipments, bundle the wires by using the supplied
wire fixing tool. Be sure the wires are not unbundled or came off when rotating or operating.
※ Insert the cables and pull the angle adjustment bracket forward. Arrange the wires by using the hole to avoid the
interference with wires when rotating the set.
Check the operation 2 ~ 3 times and fix the wall molding if it works properly.
WMN4070SD-eng-wall mount.indd 3
Fix the TV set to the wall bracket and tighten again with 4 screwsⓑ by using the
assembling tool.
(Torque : 10 ~15 Kg)
WMN4070S
2011-06-22
6:04:18
Advertisement
