Angle adjustment and rotation type wall-mount bracket (72 pages)
Summary of Contents for Samsung WMN-7070
Page 1
각도 조절 및 회전형 벽걸이 지지대 사용설명서 WMN-7070 ※ 본 제품의 경우 하기와 같은 조건일 경우만 설치 가능합니다. 1) 설치벽면이 콘크리트 벽체인 경우 2) 나무 벽인 경우 나무 두께가 최소 30mm 이상이며 나사 12개소를 모두 체결할수 있는 조건이 되는 경우...
Page 2
벽걸이 설 설 치 방법 각도 조절 장치를 그림과 같이 벽면에 고정 하십시오. ② ② ③ ③ 앵커 및 나사ⓐ 고정 방법 ⑤ ⑥ ⑥ ① ① ⑦ ④ 6X50의 드릴로 구멍을 뚫으세요. ⑨ ⑨ ⑩ ⑩ ⑪ ⑫ ⑫ 뚫은...
Page 3
그림과 같이 벽걸이의 브라켓 고정부를 전면으로 최대한 당긴 후에 PDP 본체를 반드시 두사람이 들고 벽걸이의 지정 부위에 걸어 주십시오. 경 고 경 경 고 ※ 벽 벽 걸이에 PDP 본 본 체를 완전히 고 고 정한 후에 벽 벽 걸이 양쪽 상 상...
Page 4
제품 S 제품 규 규 격 폭(mm) 864.0 높이(mm) 550.0 깊이(mm) 45.5 20.0 무게(Kg) 벽걸이 VESA 규격 800 X 400 제품의 외관이나 사양등은 제품의 개량을 위해서, 사전에 예고 없이 변경될 수 있습니다.
Tilting and Swivel Wall Mount User Manual WMN-7070 ※ This product can only be installed under the following conditions. 1) If the wall is made of concrete. 2) If the wall is made of wood, the wall should be at least 30 mm thick and all 12 screws should be used.
Installing the Wall Mount Fix the Angle Adjusters onto the wall as shown by the figure. ② ② ③ ③ Installing the anchors and screws ⓐ ⑤ ⑥ ⑥ ① ① ⑦ ④ Drill a hole with 6X50 bit. ⑨ ⑨...
Page 7
Pull the bracket fixing part of the wall mount as far forwards as possible. Then two persons should hold the PDP and hang the PDP onto the specified part of the wall mount. ※ ※ After completely fixing the PDP main body onto the wall mount, fasten the safety pins at the top parts of both sides of the wall mount so that the PDP main body and the wall mount are not separated.
Specifications Specifications Width (mm) 864.0 Height (mm) 550.0 Depth (mm) 45.5 Weight (Kg) 20.0 Wall Mount VESA Specifications 800 X 400 The appearance or specifications of the product are subject to change for improvement of the product without prior notice.