Necs, Nes, Nescc, Nes-He, Int2 Series Programming - First Sales NC Series Installation Instructions And Owner's Manual

NECS, NES, NESCC, NES-HE, INT2 Series Programming

FIGURE 7: Front of Electronic Meter Timer Assembly
SET BUTTON
1. Press and hold "Set Button" for 5 seconds to enter Programming Mode.
2. When valve is in Programming Mode, press "Set Button" to confirm setting and advance to next
menu option.
ADVANCE BUTTON
1. Press and hold "Advance Button" for 5 seconds to initiate an immediate regeneration cycle.
2. Press and release "Advance Button" during a regeneration cycle to immediately advance the valve
to the next step in the regeneration process.
3. When the valve is in Programming Mode, press the "Advance Button" to move the cursor.
UP BUTTON
1. When the valve is in the Programming Mode, press "Up Button" to adjust setting.
Advance Button
10