Thread Take-Up Lever - Medion MD 17187 User Manual

Preparatory work
54 of 122
 Pass the thread under the front thread guide and upwards, which automat-
ically pushes up the inner guide spring.
 Then insert the thread from right to left into the hook of the thread take-
up lever(2).
NOTICE
If necessary, turn the hand wheel (21) to raise the thread take-up lever(2).
 Now guide the thread down towards the needle (26). This brings it through
the internal thread guide and the thread guide of the needle holder (32).
 Now pass the thread through the eye of the needle from the front to the
back and leave a thread end of around 10 cm.