Hitachi DH 40SR Service Manual And Technical Data page 11

11. Tamping work (hammering)
+ +
(2) Shank
(1) Rammer
Code No. 955181 Overall length
Code No.
O. D. 140 mm (5-1/2")
250 mm (10") 955186
12. Syringe (for chip removal)
Code No. 318085
13. Grease for hammer, hammer drill
70 g (2.5 oz) Tube
30 g (1 oz) Tube
500 g (1.1 lbs.) Can
Code No. 308471
Code No. 981840
Code No. 980927
Note: Code numbers listed above are subject to change without notice. Please refer to periodic Technical
News Bulletins for updates.
--- 8 ---