Hitachi DH 40SR Service Manual And Technical Data page 10

6. Demolition work (hammering)
(1) Bull point
Overall length: 280 mm (11"), 450 mm (17-3/4")
Overall length
280 mm
450 mm
7. Grooving and edging work (hammering)
(1) Cold chisel
Overall length: 280 mm (11"), 450 mm (17-3/4")
Overall length
280 mm
450 mm
8. Cutting and stripping (asphalt cutting, etc.) (hammering)
(1) Cutter
Width
45 mm (2")
9. Digging work (substitute pick-ax) (hammering)
(1) Scoop
Overall length
405 mm (16")
10. Roughing surface work (hammering)
(1) Bushing tool
Code No. 955183
+
Code No.
981922
981923
+
Code No.
981925
981926
+
Overall length
280 mm (11")
+
Code No.
956126
+
(2) Shank
Overall length
250 mm (10")
Code No.
981924
+
Code No.
955186
--- 7 ---