Single Node Power Control - Raritan CommandCenter CC-SG User Manual

26

Single Node Power Control

You can power on, power off, cycle power, and perform graceful shutdown to a single node that
has an associated power interface.
1. Click the Nodes tab.
2. Select the node that you want to perform power control on.
3. On the Nodes menu, click Power Control. The Power Control screen appears.
4. The selected node's name displays in the Node field.
5. The node's power interfaces display in the Selected list.
6. You must put the interfaces in the Selected list into the order in which you would like CC-SG
to perform the power operation. Select an interface in the Selected list, and then click the up
and down arrows to move the interfaces into the desired sequence.
7. Click the Operation drop-down arrow, and select Power On, Power Off, Power Cycle, or
Graceful Shutdown from the list.
8. If you selected Power On, Power Off, or Graceful Shutdown in the Operation field, and
more than one interface in the Selected list, type the number of seconds, from 0-120, that
should elapse between interfaces in the Sequence Interval (seconds) field.
9. Click OK to send the power operation request through the interface. A confirmation message
appears in the screen.
The message text will update when the power control operation completes successfully. If the
power control operation cannot be completed, a message with more information will appear in a
new window.
C C S G
OMMAND ENTER ECURE ATEWAY
U G
SER UIDE