Operating Sequence - LG LD-2120WH Owner's Manual

Table of Contents

Advertisement

OPERATING SEQUENCE

Press the "Power" button
Check that there is rinse
aid and salt
The corresponding indicator lights will
illuminate if refilling is necessary.
Open the door and check
the filters
Ensure they are clean and properly
positioned (See "User Maintenance
Instructions").
Load the dishes
Remove any scraps of food.
Pull the lower rack out and arrange the
dishes and cutlery in it.
Pull the upper rack out and arrange the
cups, glasses, etc. in it.
CAUTION
Do not load the items in upper rack with
the lower rack is pulled out and loaded.
Ensure that the spray arms
can rotate freely
Measure out detergent
Add the required amount of detergent into
the dispenser. Close the detergent
dispenser lid.
Setting and starting the
program
Press the program button to select the
program.
After 3 seconds, the machine will be
operated.
If necessary, select the option function
corresponding to the desired program.
The indicator lights of the program and all
the phases the program consists of will
come on.
Before starting, the display window shows
the running time of the selected program.
After starting, the display window shows
the remaining time.
The time in the display window will start
to decrease from minute to minute.
If the door is opened during the run of the
program a safety device ensures that the
machine stops.
Once the door is closed the program will
start from the point where it was
interrupted.
At the end of the washing
program
After operating, "End"is displayed on the
digital display for seconds and buzz sound
informs you that the program has ended
and then the display shows "Cd" code. this
means that the dishwasher is working on
"Cool dry".
Cool dry-"Cd"
This process is not part of the program.
At this time, the fan will operate for a few
more minutes to diminish any remaining
moisture.
If you want, you can now open and unload
the dishwasher.
Otherwise the dishwasher automatically
switches off for safety and energy saving
later.
Empty the lower rack first and then the upper
one;this will avoid water dripping from the
upper rack onto the dishes in the lower one.
In general it is not advisable to open the door
while the machine is working;
If the door is opened however, a safety device
ensures that the machine stops.
Care must be taken if the door is opened during
the hot phase or immediately after a program has
finished, as steam may escape.
17
CAUTION
Warning

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents