Cisco Business Edition 6000S Quick Start Manual page 4

Getting to Know the Cisco Business Edition 6000S
The components of the Cisco Business Edition 6000S front and rear panels (see the illustration
inside the back cover of this document) are highlighted in Table 1.
Table 1: Components of the Cisco Business Edition 6000S Front and Rear Panels
Front Panel
1 System Status (SYS): Green ‐ Normal/booting, Amber ‐ Error
2 System Activity (ACT): Green ‐ Packet activity
3 Internal Power Supply (PS): Green ‐ System running
4 AC Power Supply: Green ‐ OK
5 Power On/Off switch
6 AC power connector
Rear Panel
7, 9 EHWIC slot 3, slot 2
8 CompactFlash 0 and 1 (0, Right)
10 PVDM3 Status: Green ‐ Initialized, Amber: Not Initialized
11, 12 EHWIC slot 1, slot 0
13 USB serial console port with enable LED
14 AUX port
15 RJ‐45 serial console port with enable LED
16 SFP socket with enable (EN) and speed (S) LED. SFP module not provided.
17, 18 10/100/1000 Ethernet port GE 0/2, GE 0/1
19 10/100/1000 Ethernet port GE 0/0
20 USB0 and USB1 (1, Top)
21 Ground connector
UCS‐E Module
22 Power switch
23 Reset switch (Resets all CMOS settings.)
24 System Status LEDs
25 VGA video connector
26 Serial port
27 Dual SD Card slots and cover
28 Gigabit Ethernet ports GE2 and GE3 (2, Top)
29 USB0 and USB1 (1, Top)
30 Management Ethernet port
31 Hard Disk 2
32 Hard Disk 0 and 1 (1, Top)