Front Panel USB 2.0 Hub Ports – Two hub ports allow for USB peripheral sharing among connected computers. BANK LED – This 2-digit display represents the KVM’s place in a cascaded installation hierarchy. The first KVM in a chain will have a BANK number of 00; standalone KVM’s will also have a BANK number of 00.
• Position system cables and power cables carefully; be sure that nothing rests on any cables. • To help protect your system from sudden transient increases and decreases in electrical power, it is recommended that you plug your devices into a Tripp Lite Surge Protector, Line Conditioner, or Uninterruptible Power Supply (UPS).
Connect your monitor to the DVI-I Female console port on the back panel of the KVM switch. Note: A VGA monitor can be connected using a DVI to VGA adapter, such as Tripp Lite’s P556- Series adapter cables. Computers that support analog audio through the VGA or DVI-I ports must be connected to the KVM switch in order for video to be displayed on a VGA monitor.
BANK 00. Connect the included power supplies to the DC power jacks on the back of the first- and second-level KVM switches, then plug them into a Tripp Lite Surge Protector, Power Distribution Unit (PDU), Uninterruptible Power Supply (UPS), or wall-outlet.
Page 7
Operation Bind KVM and USB [Scroll Lock] [Scroll Lock] [Z] When the KVM and USB Hub Hub Functionality functionality have been unbinded, performing this hotkey command will bind them back together. The focus of the USB Hub ports, KVM and Audio will now all switch at the same time.
Seller will repair or replace the product, in its sole discretion. Service under this Warranty can only be obtained by your delivering or shipping the product (with all shipping or delivery charges prepaid) to: Tripp Lite; 1111 W. 35th Street;...