Calibrating The Listening Position - Intelligent Time Alignment Tune; Speaker Configuration And Volume Setup; Creating A Virtual Center Speaker - Cso; Using Rear Speakers Like Subwoofers - Rear Bass Enhancer - Sony XAV-601BT Owner's Record

G:\#sagyou\Sony\0117\4419667111\4419667111XAV601BTU\01GB_XAV601BT\01
US02CD-U.fm
00US+00COV-U.book Page 42 Tuesday, January 17, 2012 6:08 PM
Calibrating the listening position
— Intelligent Time Alignment Tune
You can precisely calibrate your listening
position from each speaker so that the sound
delay reaches the listener more correctly.
Before starting, measure the distance between
your listening position and each speaker.
1
During reception/playback, press
(HOME) then touch
2
Touch , then "Listening Position."
3
Touch "Custom Tune."
The setting display appears.
Back ATT
Position Tune
100 100 100 100
(cm)
Reset
4
Touch +/– of each speaker to set the
distance between your listening
position and the speakers.
The distance is adjustable in 2 cm (
steps, between 0 and 400 cm (0 and 13
To restore the default setting, touch "Reset."
5
Touch "OK."
The setting is complete.
To return to the previous display, touch
Note
The setting is applied only after "OK" is touched.
42
.
Top
100
OK
13
/ in)
16
1
/ ft).
10
.
Speaker configuration and
volume setup
Creating a virtual center speaker
— CSO
To fully enjoy surround sound, it is preferable to
have 5 speakers (front left/right, rear left/right,
center) and 1 subwoofer. CSO (Center Speaker
Organizer) allows you to create a virtual center
speaker even though a real center speaker is not
connected.
1
During DVD playback, touch the
display.
2
Touch .
The Disc Option menu appears.
3
Touch "Center Speaker Organizer."
The options appear.
4
Touch "CSO1," "CSO2," or "CSO3."
The setting is complete.
To return to the previous display, touch
Note
"CSO" is effective only when "Multi Ch Output" is set to
"Multi" (page 51), as it is effective only for playback of
multi-channel sources.
Using rear speakers like
subwoofers — Rear Bass
Enhancer
Rear Bass Enhancer enhances the bass sound by
applying the low pass filter setting (page 48) to
the rear speakers. This function allows the rear
speakers to work like a pair of subwoofers if one
is not connected.
1
During reception/playback, press
(HOME), then touch
2
Touch .
The sound setting menu appears.
3
Move the scrollbar up and down, then
touch "Rear Bass Enhancer."
The options appear.
4
Touch "RBE1," "RBE2," or "RBE3."
The setting is complete.
To return to the previous display, touch
masterpage:Left
.
.
.
XAV-601BT
4-419-667-11(1)