Troubleshooting; Problem Installing Software - Creative PC-CAM 300 User Manual

Troubleshooting

Problem Installing
Software
Problems Using
PC-CAM 300
If you have a technical problem with this product, you may wish to consult our self-help tool
"Knowledgebase" for on-line troubleshooting and solutions (www.europe.creative.com/
support)
The setup program for PC-CAM 300 does not run automatically after you insert the
Installation CD into the drive.
Cause The AutoPlay feature in your Windows system may not be enabled.
Solution To install the software from the CD:
1. Leave the installation CD in the CD-ROM drive.
2. Click Start -> Run.
3. In the Run dialog box, click D:\CTRUN\CTRUN.EXE (where D: represents
your CD-ROM drive).
4. Follow the instructions on the screen to complete the installation.
There is no USB port available to connect the USB cable.
Solution Do one of the following:
Unplug the device currently connected to the USB port.
Add a self-powered USB hub.
Add a PCI USB card.
B
Troubleshooting B-1