Recording A Video Clip - Creative PC-CAM 300 User Manual

Recording a Video
Clip
In Video Recording mode, the
camera's flash is automatically
disabled.
3-6 Using PC-CAM 300 as a Digital Camera
Camera shake
Shaking the camera while taking pictures may also result in a blurred picture. So keep
your hands steady at all times for sharp, clear pictures.
To avoid shaking the camera, gently squeeze the Snapshot button.
If necessary, use both hands to hold the camera while pressing the Snapshot button.
To start recording a video clip, do the following:
1. Press the Operation Mode button to select the Video Recording mode
2. Aim the camera at the desired object, use the camera's viewfinder to verify that the object is
in the camera's view.
Note: The object should be at least 75 cm from the camera.
3. Hold the camera still and press the Snapshot button.
A beep sound is heard at the start of recording.
The Video Recording mode icon flashes to indicate that recording has begun.
4. The front red LED lights up and the camera-ready green LED indicator blinks. At this point,
do not shake the camera. When the video has been taken, the indicator will go off.
Audio recording is enabled automatically during video taking.
5. Press the Snapshot button once more to end the recording.
A beep sound is heard at the end of the recording.
6. The recorded video clip taken is stored in the camera's memory, and the counter value
decreases accordingly.
.