In Windows 2000 - Creative PC-CAM 300 User Manual

In Windows 2000

1. Do not connect PC-CAM 300 to your computer before installing the drivers.
If you accidentally begin installation with PC-CAM 300 connected, the Found New
Hardware Wizard dialog box appears. Disconnect PC-CAM 300 from your computer and
then click the Cancel button.
2. Insert the PC-CAM 300 installation CD.
3. Click the names of the drivers and applications you want to install on your computer.
4. Follow the instructions on the screen to complete the installation.
A Digital Signature Not Found dialog box appears, telling you that an unknown software
package has been detected, ignore the message and click the Yes button.
You may be asked, after an application is installed, if you want to restart your computer.
Do not restart your computer until all the drivers and applications are installed.
5. Connect PC-CAM 300's USB cable to an available USB port on your computer.
6. Place PC-CAM 300 on top of your computer monitor or another flat surface.
7. Two Digital Signature Not Found dialog
boxes appear one at a time, telling you that
Creative PC-CAM 300 (Still Image)
(Figure 1-6) and Creative PC-CAM 300
(Video) have been detected.
8. Ignore the messages and click the Yes
button for each dialog box.
Figure 1-6: Digital Signature Not Found dialog box.
Installing PC-CAM 300 1-11