Toshiba B-SX6T Series Option Installation Manual page 9

INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
4. Remove the four FL-4x6 screws to detach the front cover.
FL-4x6 Screw
5. Remove the SM-4x8 screw and operation panel harness to detach the operation panel.
6. Connect the strip harness to CN5 on the PWM PC Board through the opening of the strip base.
Strip Unit
PWM PC Board
FL-4x6 Screw
Operation Panel
Strip Base
2- 2
EO15-33002
2. Strip Module: B-SX908-H-QM-R
FL-4x6 Screw
SM-4x8 Screw
Operation Panel Harness
Strip Harness
Opening
CN5