When Program Has Ended; Error Codes; Maintenance; General - Electrolux T5190 User Manual

3.4 When program has ended

Note!
For the best possible drying result it is important to empty the machine as soon as the program has ended.
If the machine is not emptied as soon as the program has ended the drum will rotate in short intervalls in order to
keep the goods from being wrinkled.
Clean the filter after each drying cycle for best performance.

4 Error codes

A fault in the program or in the machine is indicated by an error code on the display.
Some of these error codes can be solved easily without contacting service personnel.
Error Text
code
12:11
DRYING ERROR WITH RMC
PROGRAM
12:12 DRYING ERROR WITH AUTOSTOP
PROGRAM
12:18
REDISTRIBUTION OF LOAD
NEEDED
20:1
O.H. DRUM MOTOR
For other error codes or repeated error codes, disconnect the power for 30 seconds. If the error code keeps coming
back, contact authorized service personnel.

5 Maintenance

5.1 General

It is the responsibility of the owner of the machine/the laundry manager to make sure that maintenance is periodically
performed.
Note!
Lack of maintenance may deteriorate the performance of the machine and may cause damage to
components.
User manual
Cause/Action
The longest permitted RMC time has been exceeded. (Applies only to machines with RMC).
The machine is overfilled or the garment is too wet.
The longest permitted automatic stop time has been exceeded. (Applies only to machines with
automatic stop).
The machine is overfilled or the garment is too wet.
Machine indicates that load is blocking the airflow.
Redistribute the load.
Restart the machine to clear error message.
The motor is too hot.
The machine will restart automatically when the temperature on the motor is OK (if the door
has not been opened).
17
fig.7570