Hyundai J3 Shop Manual page 182

REMOVALANDREPLACEMENTPROCEDURE
REMOVALAND
REPLACEMENTPROCEDURE
Cooling fan motor
Removal
1.
Disconnect negative battery cable,
2. Remove lnesh air duct. .
3. Disconnect cooling lan motor eonnector.
4. Remove thnee bollS securing eooling lan assembly.
Fan motor
,
U-<:Iip
Cooling lan
BV2A12001
5. Remove eooling lan assembly.
6. Remove U-i:lip securing eooling lan and remove
eooling lan.
7. Remove nuts seeuring lan motor and remove lan
motor.
EM-41
Replacement
1. Install lan motor.
2. Install eooling lan to lan motor by use 01 U-clip.
3. Install cooling lan assembly.
4. Reconnect cooling lan motor eonnector ..
5. Install fresh air duct.
6. Reeonnect negative battery cable.
Radiator
Removal
1. Drain engine eoolan!.
2. Remove eooling lan assembly.
(Rafer
to cooling
fan molor removal ; from stBp 1 10
step5.)
3. Disconnect coolant upper hose.
4. Disconnect reserve tank hose.
5. Disconnect eoolant lower hose.
6. Remove radiator braekelS.
T
Radiator
~
bracket :
Radiator
7. Remove radiator.
T
"
, ,
, ,
BV2A12002