Connection Overview; Connecting To Your Pc - Silvercrest 66978 User Manual And Service Information

SilverCrest USB 2.0 Video Grabber SVG 2.0 A2

Connection overview

Connect the adapter (5) to the Video Grabber (1). Insert the adapter into the jack at the back of the
Video Grabber (see diagram).
Video Grabber
Snapshot button

Connecting to your PC

In order to record with the Video Grabber, you must first install the software (POWER DIRECTOR). If
you haven't already done so, go to the section entitled "Installing the software" and follow the
instructions.
 Connect the adapter (5) to the Video Grabber (1) as shown in the previous diagram.
 Connect the video output of your source (e.g. camcorder) to the Video Grabber. The following
connection types are available here:
1
This button generates a snapshot (photo of the current video) when the recording mode of the
enclosed Power Director software is activated.
Adapter
1
S-Video input
Stereo audio input (white/red)
Composite video input (yellow)
English
9