Grizzly G0443 Owner's Manual page 23

19. insert the rubber seal over the top lip of the
collection drum rim. pay special attention
to the direction of the seal, as shown in the
figure 26.
Tip: To keep the seal in place, you can use
an adhesive applied to the rubber seal at
approximately 1" intervals.
figure 26. installing canister seal.
20. insert the larger of the plastic collection bags
into the collection drum, place the lid on the
collection drum and hook the latch over the
lid, as shown in figure 27, then clamp it in
place.
figure 27. latch hooked over lid for clamping.
Model g0443 (Mfg. since 11/09)
seal
optional
adhesive
drum
rim
21. Move the collector drum under the dust col-
lector and connect it to the cyclone funnel
with the clear flexible hose and the two 9"
hose clamps, as shown in figure 28.
figure 28. drum attached to cyclone funnel with
clear 9" hose.
22. Connect the vacuum hose to the cyclone fun-
nel and collection drum vacuum tubes with (2)
1 ⁄ " hose clamps, as shown in figure 29.
1
4
figure 29. Connecting the vacuum hose.
-21-