Honeywell Tuxedo Touch Manual page 10

Step-by-Step
Press the "Add Device Icon"
- On the Thermostat, change the 0 to a 1 to learn Network information from the Tuxedo Touch.
- Press 'Done' to exit programming.
Notes:
- Locations 0615 (Heat Set Back) and 0616 (Cool Set Back) are End User Programmable. (See the
thermostat Owner's Manual for more information)
Back to Table of Contents
Change this
value to a 1.
Once that is done
you will see
- 10 - Updated: 4/20/12