Whirlpool RF3165XW Use & Care Manual page 10

Adjusting the Oven Temperature Control
Does your oven seem hotter or colder than your old oven? The temperature of
your old oven may have shifted gradually without your noticing the change.
Your newoven is properly adjusted to provide accurate temperatures. But
when compared to your old oven, the new design may give you different
results.
If after using the oven for a period of time, you are not satisfied with the
temperature settings, they can be adjusted by following these steps:
LOCKING
SCREWS
1. Pull the Oven Temperature Control
2. Loosen the locking screws inside
Knob straight off.
the control knob. Rote the posi-
tion of the notches.
TOOTH
NOTCHES
3.
To lower the temperature, move
the tooth a notch closer to LO.
Each notch equals about 10°F
(5°C).
TOOTH NOTCHES
4.
To raise the temperature, move
the tooth a notch closer to HI. Each
notch equals about 10°F (5"CJ.
lighten the locking screws and
replace the control knob.
10