Set-Up Location; Never Attempt To Repair The Product - Medion LIFE P89655 Instruction Manual

Safety instructions
• If the product has been moved from a cold room to a warm
room, wait before connecting it to the power supply. The re-
sulting condensation may damage the product. The product
can be plugged in and operated safely as soon as it reaches
room temperature.

3.3. Set-up location

• Set up and operate all the components on a stable, level and
vibration-free surface to prevent the product from falling.
• Do not subject the product to knocks and vibrations. Knocks
and vibrations may damage the sensitive electronics.
• Do not place the product near heat sources (e.g. heaters) that
could affect it.
• Do not place naked flames (e.g. lit candles) on or near the
product.
• Make sure that the vents are never covered so as to ensure
that there is always adequate ventilation.
• Do not place any objects on the cables to avoid damaging
them.
• Maintain a minimum distance of approx. 10 cm between the
product or mains adapter and any walls. Ensure adequate
ventilation.
• Do not use the product outdoors as it could be damaged by
rain, snow, etc.
• To avoid malfunctions, keep the product at a distance of at
least one metre from high frequency or magnetic interfer-
ence sources (televisions, loudspeakers, mobile telephones,
etc.).
• Major changes in temperature or fluctuations in humidity can
cause moisture to build up within the product due to con-
densation – this can cause an electrical short circuit.

3.4. Never attempt to repair the product!

If the mains adapter, connecting cable or product is damaged,
remove the plug from the power outlet immediately.
100 of 154