Pet Feedster PF-10 PLUS Operating Instructions Manual page 22

My Pet Feedster isn't working.
1. Check that your power is connected. Is the body
firmly attached to the base? (One post connects to your
AC adapter, so make sure it's connected firmly to the base)
2. Check your Flex Feeder. Is it set to the right size?
Is the largest size of food able to pass through the
triangle-shaped opening easily? (Adjust to the right
setting. Half sizes also work!) Is it firmly connected to the
motor? (Push the Flex Feeder into the motor shaft until
it catches in) Is the bottom of the Flex Feeder cracked
or damaged? If so it might need to be replaced. (You
can purchase replacement parts at petfeedster.com)
3. Check your timer display.
When a meal is served, the timer display will blink, the
motor spins, and food is dispensed to your pet. When
a meal is served sucessfully, there is a black dot for that
meal's circle.
If there were a power outage and the motor did not
turn, or the connection between the motor and the
timer was faulty for that meal, the timer display will read
"ERR." In that case, the circle for that meal will not be
marked with a black dot, even if meals before or after
were successfully served.
21