Pet Feedster PF-10 PLUS Operating Instructions Manual page 18

TO ERASE ALL MEAL PROGRAMMING
A. Make sure you are in the master clock (not in any
setup mode). If you are, wait 60 seconds to revert back
to the master clock.
B. Press down on both the NEXT button and the ADJ
button at the same time for 3 seconds.
Note: The master clock will keep its time, but all meal
information will be erased.
MANUAL FEEDING OR ADDITIONAL FEEDING
BETWEEN MEALS
A. Press down on the MODE button for 10 seconds to
show "ADJ" on the timer display.
B. Press the ADJ button and food will start dispensing.
Press the ADJ button again to stop.
C. When finished, allow 60 seconds for the timer display to
revert back to master clock.
Watch videos, read tips, and more at petfeedster.com
under Owner's Resources.
17