Programming Instructions - Pet Feedster PF-10 PLUS Operating Instructions Manual

PROGRAMMING INSTRUCTIONS

STEP 1 Insert batteries or plug in the AC adapter.
STEP 2 Adjust the Flex Feeder to S, M, or L per the
size of your biggest piece of kibble. (If you are using
kibble that is 3/8" do not set the Flex Feeder to large.
For most cat food, the Flex Feeder is set to small)
A. Measure the size of your largest kibble piece.
B. Loosen the bottom of the Flex Feeder.
C. Adjust the shaft to the correct size. This is the
triangle-shaped opening of the Flex Feeder. The
biggest piece of kibble should be able to pass
through the opening very easily.
D. Finger tighten the bottom of the Flex Feeder.
Note: See pages 7-11 for more details.
STEP 3 Insert the Flex Feeder into the bottom of
the food container.
STEP 4 Add 3 to 5 cups of pet food.
STEP 5 Press down on both the NEXT and ADJ
buttons at the same time for 3 seconds.
11