Actron CP9680 AutoScanner Plus Quick Start Manual page 12

1 2 | Quick Start Guide
Function
Language
Setup
Long PID
Names
MIL Status
Memory Test
Modules
Present
O2 Monitor
Tests
Oil Light
Reset
On-Board
Systems
Pre-Trigger
Setup
573101 REV A | 02.2015
Menu
System Setup
System Setup
Special Tests
System Setup
Special Tests
Special Tests
Special Tests
Special Tests
System Setup
Description
Allows the user to change the lan-
guage used by the tool. English is
the default.
Allows the user to enable/disable
the tool scrolling the complete PID
name on the bottom line of the
display while viewing live data or
viewing freeze data.
Displays whether the Malfunction
Indicator Lamp is on or off.
Checks RAM and Flash ROM.
Views the status of all OBD II com-
pliant modules.
The O2 Monitor Tests is NOT an ON-
DEMAND TEST. This Function displays
oxygen sensor monitoring test results
from the vehicle's memory.
This function is used to reset the
change oil light on applicable vehi-
cles. The function only appears on
the menu when supported by the
currently selected vehicle.
Scan tool controls the operation of
vehicle components, tests or systems.
This function is used to configure
how many Pre-Trigger frames are
stored prior to beginning a recording.
Bosch Automotive Service Solutions Inc.
English