Specifications; General Specifications - Yamaha Rio3224-D2 Owner's Manual

Specifications

General Specifications

Sampling Frequency
Signal Delay
Frequency Response
*1
Total Harmonic Distortion
*2
Hum&Noise
Dynamic Range
Crosstalk@1 kHz
Dimensions (WxHxD)
and Net Weight
Power Requirements
(wattage)
Power Requirements
(voltage and hertz)
Temperature Range
NC value
Included Accessories
*1. Total Harmonic Distortion is measured with 18 dB/octave filter @80 kHz
*2. Hum & Noise are measured with A-Weight filter.
*3. Crosstalk is measured with a 30 dB/octave filter @22 kHz
44.1 kHz
+4.1667%, +0.1%, –0.1%, –4.0%
48 kHz
+4.1667%, +0.1%, –0.1%, –4.0%
External
88.2 kHz
+4.1667%, +0.1%, –0.1%, –4.0%
96 kHz
+4.1667%, +0.1%, –0.1%, –4.0%
Less than 1.7 ms
Rio INPUT to Rio OUTPUT connect with PM10 using Dante, Fs= 96 kHz.
Dante Receive Latency set to 0.25 msec
+0.5, –1.5 dB 20 Hz-20 kHz, refer to +4 dBu output @1 kHz, INPUT to OUTPUT, Fs= 48 kHz
+0.5, –1.5 dB 20 Hz-40 kHz, refer to +4 dBu output @1 kHz, INPUT to OUTPUT, Fs= 96 kHz
Less than 0.05% 20 Hz-20 kHz@+4 dBu into 600Ω, Fs= 48 kHz
Less than 0.05% 20 Hz-40 kHz@+4 dBu into 600Ω, Fs= 96 kHz
INPUT to OUTPUT, Input Gain= Min.
–128 dBu typ., Equivalent Input Noise, Input Gain= Max.
–88 dBu Residual output noise, ST master off.
112 dB typ., DA Converter,
108 dB typ., INPUT to OUTPUT, Input Gain= Min.
*3
–100 dB , adjacent INPUT/OUTPUT channels, Input Gain= Min.
Rio3224-D2: 480 mm x 220 mm x 367.5 mm, 13.5 kg
Rio1608-D2: 480 mm x 132 mm x 367.5 mm, 9.6 kg
Rio3224-D2: 120 W
Rio1608-D2: 72 W
100-240V 50/60 Hz
Operating temperature range: 0 - 40°C
Storage temperature range: –20 - 60°C
Rio3224-D2
FAN MODE LOW: NC=20 / HIGH: NC=30
Rio1608-D2
FAN MODE LOW: NC=15 / HIGH: NC=25
Measurement position: 1 m from the front of the unit
Owner's Manual, AC power cord, Dante Virtual Soundcard Token leaflet
Specifications
±200 ppm
±200 ppm
±200 ppm
±200 ppm
Owner's Manual
29