Remote Control Unit - Technibel MCW2B5XA Operating Instructions Manual

REMOTE CONTROL UNIT

DISPLAY
Information are displayed when the remote control unit is
switched on.
Operation Mode
Cooling
Heating
Dehumidification (dry)
GB
Fan only
Displayed
when the
timer on
is set and
activated
Displayed
when the
timer off is
set and
activated
Displayed
when daily
program is
set and
activated
Fan speed indication
Automatic fan
speed
High speed
Medium speed
Low speed
MODE SELECTOR BUTTON
Press this button to modify the air conditioner
mode.
(heating) *
The air conditioner makes the room warmer.
dehumidification (dry)
The air conditioner reduces the humidity in the room.
(cooling) *
The air conditioner makes the room cooler.
(fan) ***
The air conditioner circulate the air.
* Only if the system is set in the same mode
** Only if the system is set in cooling mode
*** Only if valve with bridge 3/4 on the terminal
base is installed
FAN SPEED SELECTOR BUTTON
Fan speed is
automatically
selected by the
microcomputer.
High speed.
Medium speed.
Low speed.
FLAP POSITION SELECTORS
Press this button to select the desidered
flap sweep function.
: The flap moves up and down
automatically.
: Every time you push the
button the flap moves one
step.
Displayed when data
trasmitted
Or remote control unit lock
Clock
(hours and
minutes)
Set
temperature
or room
temperature
Displayed
when the
temperature is
the room
temperature
Indicate that
Displayed in Sleep
the air
Mode Operation
conditioner is
operating in I
Automatic flap
FEEL mode
oscillation switched on
**
TEMPERATURE SENSOR
SELECTOR
Push IFEEL button to activate the
temperature control in the remote
control unit. This function provides a
more confortable temperature control.
SENSOR
A temperature
sensor inside the
remote control unit
detects the room
temperature.
ON/OFF
OPERATION
BUTTON
This button turns
the air conditioner
ON and OFF.
LOCKING THE REMOTE CONTROL
Pushing this button freezes the last
operation setting. When
the remote control will not be able to control
the air conditioner. To release the lock
status push
5
TEMPERATURE SETTING BUTTONS
— (cooler)
Press this button to decrease the set
temperature.
+ (warmer)
Press this button to increase the set
temperature.
TRANSMITTER
When you press the buttons of the remote
control unit, the mark appears on the
display to transmit the setting changes to
the receiver in the air conditioner.
SLEEP BUTTON
For details, see "Sleep mode".
When you press this button in the COOL,
HEAT or DRY mode, the mark
appears on the display and the
microcomputer in the remote control unit
will adjust the set temperature to save
energy.
ROOM TEMPERATURE
Push the ROOM button to show the actual
room temperature around the remote
control.
SET BUTTON
Push this button to select the functions:
• set the present time
• set the ON-OFF timer
For detail see "HOW TO SET THE
PRESENT TIME" and "SETTING THE
TIMER".
TIMER AND PRESENT TIME SETTING
BUTTONS
Pushing + or - buttons the setting of the
time and timer can be activated. For detail
see "HOW TO SET THE PRESENT TIME"
and "SETTING THE TIMER".
TIMER RESET
Push the CLEAR button to cancel all timer
setting.
TIMER BUTTON (timer setting)
Push the TIMER on the display starts the
timer ON and OFF setting procedure.
For detail see "SETTING THE TIMER".
is activated
again.