Page 1
THANK YOU for purchasing a JBL CS Series amplifier. In order that we may better serve you should you require warranty service for your new amplifier, please retain your original purchase receipt and return the enclosed warranty...
Page 2
IMPORTANT: To get the best perform- use only the same type and rating as that Ground Connection ance from your JBL CS Series amplifiers, we of the original. Do not substitute another Speaker Connections Connect the amplifier’s Ground (GND) termi- strongly recommend that installation be kind.
Page 3
To the right are two application diagrams to help plan your subwoofer system installation. Figures 2 and 3 show how to configure the CS200.1 subwoofer amplifiers. NOTE: For simplicity, Figures 2 and 3 do not show power, remote and input Figure 2.
Incorporated • Frequency response: 10Hz – 27kHz (–3dB) If using the CS50.4 to drive a • Maximum input signal: 6V JBL and Grand Touring are registered subwoofer(s), set the crossover mode to trademarks of Harman International • Maximum sensitivity: 240mV LP (low pass).