Usb Clone (Smart Loader) - Sharp LC-32LE345T Service Manual

[2] USB Clone (Smart Loader)

1. Description
The Smart Loader is a function implemented in the service software to easily replicate the user settings of one TV into another.
These settings include (but not restricted to): picture and audio, turning set-up, language and country selection, PIN, child locked programs etc.
Factory adjustments are not copied as they are different for every TV.
The Smart Loader makes possible the user data to be stored in a memory device connected to the USB terminal of the TV that is used as reference
and later load those data into other TVs by using their respective USB terminal.
2. How it works
1. Enter USB clone menu (Smart Loader)
i) Press panel key [INPUT] and [VOL+] and AC on, it will go to password entry OSD
ii) Enter digit "369" then it will go to Smart Loader Menu
2. Smart Loader function
SMLD Store
1st AQUOS TV
i) SMLD Store
• To copy all related data from TV -> USB and put under a fixed filename "SHP_SMLD.bin" (8kB).
ii) SMLD Restore
• To restore the related data from USB -> TV.
iii) SMLD Store and Restore execution
• To execute SMLD Store or SMLD Restore, highlight at selected item and press Enter.
• After cloning process is done, "OK" is displayed.
If cloning process is not finished due to error (e.g. no pendrive detected), "NG" is displayed.
3. Exit USB Clone menu (Smart Loader)
i) To exit Smart Loader menu, plug off AC Cord.
SMLD Restore
USB 2nd AQUOS TV
5 – 6
LC-32LE345T