How The Energizer Works - Gallagher M1200i Instructions Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Gallagher 3E2488 M1200i Energizer User Manual

HOW THE ENERGIZER WORKS

The energizer sends electrical pulses along the fence line, about one second apart.
These pulses give the animal a short, sharp, but safe shock. The shock doesn't harm
the animal. It is suffi ciently memorable that the animal never forgets the shock,
and will avoid the fence.
This energizer complies with the requirements for a ti me delayed electric fence
energizer and has a ti me delay of 20 seconds.
Practical Hints
Check your local ordinance on fencing laws: local laws may require a permit
before use.
Periodically check that the energizer is operati ng by checking that the
indicator light is fl ashing.
Check the fence periodically. Remove any fallen branches, weeds or shrubs
because these will cause the fence to short out and will reduce animal
control.
All animals need ti me to learn to respect the fence. It may take several days to
train the animal and the fence may require minor adjustments.
Animals that are prone to jumping may be diffi cult to confi ne. You may need
to try diff erent fence heights to determine the best height.
Use top quality insulators: low quality or cracked insulators and plasti c tubing
are not recommended because they will cause shorti ng.
Use joint clamps on all steel wire connecti ons to ensure a high quality circuit.
This energizer must be earthed using galvanised metal earth stakes to ensure
the electric fence works correctly.
Double Insulated Cable should be used in buildings, under gateways and
where soil could corrode exposed galvanised wire. Never use household
electrical cable. It is made for a maximum of 600 volts and will leak electricity.
On permanent power fencing, use high tensile 12.5 gauge (2.5 mm) wire.
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents