Table of Contents
Advertisement
Quick Links
6004 SERIES
INSTALLATION MANUAL
22.75"
SPECIFICATIONS
CONSTRUCTION
Case: High Impact Polycarbonate
Ventilation: 110 cu ft/min air volume
Acoustic rating: 50dB(A)
Weight: 20 lbs.
ELECTRICAL
Voltage required: 120VAC 60Hz
Power consumption: 200 Watts max
Start current load: 4.4 amps
Current usage: 1.8 amps
79-15022-00 Rev. C
44259 NOBEL DRIVE
10.5"
4"
11.5"
FREMONT, CA 94538
TEL(800)327-7877 FAX(510)490-3247
9.75"
10.75"
4"
13"
LAMP
Type: Metal-Halide, proprietary design
Lamp life: 6000 hrs average
Cool down restrike period: 3 minutes
Replacement p/n: Y20-6000
WARNING: DO NOT INSTALL
WITHIN 1.5M (5 FT.) OF A POOL,
SPA ,OR HOT TUB.
ADVERTISSEMENT: NE PAS IN-
STALLER A MOINS DE 1,5 M D'UNE
PISCINE OU D'UNE CUVE DE RE-
LAXATION.
12"
MAXIMUM SOIL HEIGHT:
DO NOT ALLOW FILL TO
EXCEED THIS LEVEL!
www.fiberstars.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Fiberstars 6004 SERIES
Summary of Contents for Fiberstars 6004 SERIES
- Page 1 6004 SERIES INSTALLATION MANUAL 10.5” 9.75” 12” 22.75” MAXIMUM SOIL HEIGHT: DO NOT ALLOW FILL TO EXCEED THIS LEVEL! 10.75” 4” 4” 11.5” 13” SPECIFICATIONS LAMP Type: Metal-Halide, proprietary design CONSTRUCTION Lamp life: 6000 hrs average Case: High Impact Polycarbonate...
- Page 2 ELECTRICAL CONNECTIONS 6004 E X T E R N A L COLOR WHEEL CONTROL (BROWN) 120v 60HZ ONLY TOGGLE SWITCH POSITIONS MANUAL CONTROL COLOR WHEEL POWER POWER COLOR WHEEL EXTERNAL AUTO CONTROL EXTERNAL AUTO CONTROL HOOK-UP FOR COLOR WHEEL COLOR WHEEL For Jandy Aqualink, Compool, Aquadyne, etc.
- Page 3 INSTALLATION GUIDELINES REFER TO THE DIAGRAM ON THE FRONT OF THIS MANUAL FOR THE FOLLOWING PROCEDURES SEE OUR GENERAL INSTALLATION MANUAL FOR FIBER AND CONDUIT INSTALLATION IN THE POOL. THIS MANUAL COVERS THE 6000 SERIES ILLUMINATOR INSTALLATION ONLY. CUT THE FIBER CONDUITS SO THEY WILL ENTER THE INSTALLATION BASE APPROXIMATELY HALF WAY.
- Page 4 450 or less. If you have more than 450 individual fibers, you will need a second illuminator. The maximum capacity of the 6004 series port is 450 fibers. 301 TO 400 401 TO 450 B) Insert the proper size tip into the port and twist with pliers to lock (fig.
Need help?
Do you have a question about the 6004 SERIES and is the answer not in the manual?
Questions and answers