Setting Home Id; Setting Direct Call - Radio Shack 21-1904 Owner's Manual

every 10 minutes for a period 30
minutes.To stop the beeps, press any
key except
FUNC
S H
ETTING OME
Home ID data allows you to enter the
ID number that will appear on the
receiving radio as you communicate
with it. You can select Home ID
numbers 1–16.
1. Set the transmitter and receiver to
the same channel (and same quiet
code, if you select one).
2. Hold down
FUNC
to enter Setting Home ID mode.
Release all keys, and then press
e
d
or to select your desired
Home ID number.
to store the setting. Ô
3. Press
PTT
S D
ETTING IRECT
Direct Call data allows you to enter the
receiver's radio ID number that you
want to call. The radio's receiver only
receives the Call when the Direct Call
data is matched with it's Home ID. You
can select Direct Call number 1–16 or
Group Call.
.
ID
and press
CALL
C
ALL
Ô Ô
NOTES
• If you do not press a
key within 20
seconds when
setting the Home ID,
the radio
automatically exits
Home ID without
saving your settings.
• If Home ID is
changed, the radio
automatically resets
the Direct Call
number to Group
Call.
e
• If you press
to change Direct Call
number and the
number is equal to
the Home ID, the
LCD will display the
next Direct Call
number in order to
prevent any conflict
of Home ID and
Direct Call.
d
or
19