Setting Home Id; Setting Direct Call - Radio Shack 22 Ch GMRS/FRS Two-way Radios Owner's Manual

Ô Ô
NOTE
• If you do not press a
key within 20
seconds when
setting the Home ID,
the radio
automatically exits
Home ID without
saving your settings.
• If Home ID is
changed, the radio
automatically resets
the Direct Call
number to Group
Call.
e
• If you press
to change Direct Call
number and the
number is equal to
the Home ID. Then
the LCD will display
the next Direct Call
number in order to
prevent any conflict
of Home ID and
Direct Call.
20
with it. You can select Home ID
numbers 1–16.
1. Set the transmitter and receiver to
the same channel (and same quiet
code, if you select one)
2. Hold down
to enter Setting Home ID mode.
Release all key and then press
d
or
ID number.
3. Press
S
ETTING
d
or
Direct Call data allows you to enter the
receiver's radio ID number that you
want to call. The radio's receiver only
receives the Call when the Direct Call
data is matched with it's Home ID. You
can select Direct Call number 1–16 or
Group Call. Ô
1. Hold down
Call ID number flashes on the
display. Press
receiver's home ID number or
Group option. (If you select
receiver's Home ID number 1 ~ 16,
you can only send a page to one
user or several users with the
same ID home number). If you
and press
FUNC
to select your desired Home
to store the setting. Ô.
PTT
D C
IRECT
until the Direct
CALL
e
d
or
CALL
e
ALL
to select the