Using Apo; Using Hi/Lo Transmitter Power - Radio Shack 21-1904 Owner's Manual

Ô Ô
NOTE
You cannot make the
power selection when
the radio is set to an
FRS channel (8-14).
14
U APO
SING
You can set the radio to automatically
turn off when the radio is idle (no key is
pressed and nothing is transmitted or
received) for 30, 60 or 90 minutes. To
turn APO (Automatic Power Off) on/off,
continually press
30 60 90 OFF
, , or appears. Press
to select the desired amount of time or
OFF
. If you select
automatically turn off. Before the radio
shuts off, it beeps and vibrates. To
activate the radio, press any key. Make
sure the radio is set to
rotary switch to on. The radio beeps
and vibrates when you turn it on.
U H /L
SING I
TRANSMITTER POWER
You can set the radio transmit power to
0.5W or 1.5W. The transmit power of
channels 8–14 is fixed at 0.5W only
(FRS channel). To select 1.5W transmit
power, make sure that the channel is
not on channels 8–14 and then press
Lo
until appears. If you select
MENU
OFF
, the radio transmit power is 1.5W;
ON
select to set the transmit power to
0.5W.Ô
APO
until and
MENU
e
OFF
, the radio does not
ON
by setting the
O
d
or