Command-Line Options - Matrix Vision mvBlueFOX Technical Manual

122
The sleep states can also be enabled or disabled from a script by calling mvDeviceConfigure like this:
mvDeviceConfigure.exe set_processor_idle_states=1 quit
or
mvDeviceConfigure.exe set_processor_idle_states=0 quit
The additional quit will result in the application to terminate after the new value has been applied.
Note
With Windows Vista or newer mvDeviceConfigure must be started from a command shell with administrator
privileges in order to modify the processors sleep states.

11.2.4 Command-line options

It is possible to start mvDeviceConfigure via command line and controlling the starting behavior using parameters.
The supported parameter are as follows:
Parameter
setid or id
set_processor_idle_states
set_userset_persistence
update_fw or ufw
update_fw_file or ufwf
custom_genicam_file
update_kd or ukd
ipv4_mask
fw_file
fw_path
log_file or lf
quit or q
force or f
Figure 66: mvDeviceConfigure - Settings
Description
Updates the firmware of one or many devices(syntax
: 'id= serial . id ' or 'id= product . id ').
or spis Changes the C1, C2 and C3 states for ALL processors in the
current system(syntax: 'spis=1' or 'spis=0').
or Sets the persistency of UserSet settings during firmware up-
sup
dates (syntax: 'sup=1' or 'sup=0').
Updates the firmware of one or many devices.
Updates the firmware of one or many devices. Pass a full
path to a text file that contains a serial number or a product
type per line.
or Specifies a custom GenICam file to be used to open devices
cgf
for firmware updates. This can be useful when the actual XML
on the device is damaged/invalid.
Updates the kernel driver of one or many devices.
Specifies an IPv4 address mask to use as a filter for the se-
lected update operations. Multiple masks can be passed here
separated by semicolons.
Specifies a custom name for the firmware file to use.
Specifies a custom path for the firmware files.
Specifies a log file storing the content of this text control upon
application shutdown.
Ends the application automatically after all updates have been
applied.
Forces a firmware update in unattended mode, even if it isn't
a newer version.
Can be used as a wildcard, devices will be searched by se-
rial number AND by product. The application will first try to
locate a device with a serial number matching the specified
string and then (if no suitable device is found) a device with a
matching product string.
CONTENTS
MATRIX VISION GmbH