Before You Begin; General; Product Safety; Lenses - GE Interlogix KTC-511P Installation Instructions And Owner's Manuals

B Y
EFORE OU
G
ENERAL
Thank you for choosing this advanced and high quality camera. Before connecting or operating
this product, please read these instructions carefully.
These instructions cover the entire range of the GE series of CCTV cameras.
Note that not all cameras have all of the features described in this manual.
As standard, all cameras within the range are fitted with an auto iris lens connector, adjustable
back focus, and accept both C and CS lenses (with supplied adapter.)
P S
RODUCT AFETY
ATTENTION:-
Only qualified and experienced personnel should install and service this equipment.
Cameras operating at AC mains 230 V contain hazardous voltages.
Do not remove the camera casing, as there is a risk of injury or death by electric
shock.
No user serviceable parts inside.
Cameras connected to mains supplies must be connected to an earth connection.
Only operate low voltage cameras from a Class 2 isolated power supply.
The GE series of CCTV cameras are designed for use in general purpose CCTV applications.
Only operate the cameras between –10
Do not use the camera outside the specified power supply range.
The cameras must be used in a clean, dry, dust free environment, unless fitted into a suitable
protective housing rated at IP65.
The voltage required to operate the camera is clearly marked on the rear of the camera.
Low voltage versions must be used with a Class 2 isolated power supply
The Red Power LED on the rear panel indicates that power is connected.
L
ENSES
To optimise the picture quality from the camera, it is important to select the appropriate lens for
the application, and to ensure the lens is correctly set up.
•
Before fitting a lens, make sure that the rear of the lens does not touch the CCD image
sensor inside the camera.
•
Do not touch the surface of the CCD image sensor.
•
Do not expose the CCD image sensor to direct sunlight, as this may impair or damage the
camera's performance
B
EGIN
o
C and + 50
o
C.
Installation Instructions
3